|
| 
|
 |
 |
|
|
|
Dual WAN routers by XiNCOM
The XiNCOM Twin WAN (Dual WAN) Router Family are the highest quality, most durably constructed broadband routers on the market today. We strive to manufacture the latest technology to be compatible with and surpass todays demanding and ever changing Broadband industry.
¤ The
XiNCOM XC-DPG502 provides a secure and reliable connection
to the Internet and corporate network connectivity to
small branch offices and small to medium sized businesses.
The XC-DPG502 has two WAN ports that allow you to connect
two separate broadband connections of any type, including
Cable, DSL and/or T1 for ultimate automatic fail-over,
and load balancing. With cutting edge features like NAT,
SPI Firewall, DHCP server, and Access Filters makes this
a must have for any network.
The XC-DPG502 allows for easy setup, configuration, and
management through an HTTP Graphical User Interface (GUI),
as well as remote web management, e-mail Alerts, and SNMP
protocol. Additionally the XC-DPG502 can be used within
a network with support for Static Routing, RIP-1/RIP-2,
and Dynamic Routing. With the addition of uPnP you will
be able to dynamically open and close ports required by
certain software automatically. With QoS you will be able
to schedule and direct your network traffic to take advantage
of your available bandwidth.
|
Key
Features
· Multiple Connection Methods:
All popular broadband connection methods are supported,
including Fixed IP, Dynamic IP, PPPoE, and even
multiple-session PPPoE.
· Load Balancing:
Allows you to use both WAN ports simultaneously,
increasing your available bandwidth.
You can set load balance type by Packets, Bytes
RX+TX, and Sessions.
· Automatic Fail-over:
If one broadband connection goes down all traffic
is automatically re-routed through the second broadband
connection.
· Stateful Packet Inspection Firewall:
Protects your network using advanced SPI against
malicious and DDoS attacks.
· Advanced NAT features:
Access Filters, DMZ, DDNS, Remote Management, Dynamic
or Static Routing, Special Applications, Virtual Servers,
SNMPv1.
· Access Filter:
Gain fine control over the Internet access and applications
available to LAN users with a powerful URL Blocking Engine.
Five (5) user groups are available, and each group can
have different access rights.
· Virtual Servers:
Allow Internet users to access Internet servers
on your LAN. Easy configuration of standard servers such
as Web, FTP or E-Mail servers, plus the ability to define
your Server types if required.
Product Spec Sheet
(PDF)
|
|
|
|
|
¤ The
XiNCOM XC-DPG503 is a VPN capable Dual WAN Gateway with industry standard IPsec encryption. It provides extremely secure Gateway-to-Gateway connectivity over the Internet. The 503 supports VPN by encryption, encapsulation, and authentication using the following methods: DES/3DES/AES, MD5, SHA-1 and SHA-2; up to 30 IPsec tunnels are permitted. VPN connection redundancy is maintained by VPN Auto Failover. In the event of a VPN tunnel failing, the XC-DPG503 will re-establish the tunnel with the second WAN port connection.
Using two separate ISPs provides redundant connectivity to the Internet. In the event that one ISP goes down, the XC-DPG503 automatically fails over to the other ISP service. Redundancy to the Internet provides a truly uninterrupted connection for a business's customers while maintaining uptime and productivity for its employees.
Two WAN ports that allow you to connect two separate broadband connections of any type, including Cable, DSL and/or T1 for ultimate automatic failover and full load balancing services. The XC-DPG503 also features NAT, a Stateful Packet Inspection Firewall, DHCP server, Access Filters, and VPN pass-through to secure a businesss network services. The Quality of Service (QoS) feature schedules and directs a networks traffic to take advantage of available bandwidth. UPnP support can dynamically open and close ports required by certain software automatically. Increased bandwidth and redundant connectivity to the Internet provides cost-effective bandwidth solutions to expensive leased telecommunication lines for your network infrastructure.
|
|
| |
Key
Features
· Physical Interface Features:
WAN:
2-port 10/100 Mbps RJ45
Auto-MDI/MDIX; 802.3/802.3u
LAN:
4-port 10/100 Mbps RJ45
Auto-MDI/MDIX; 802.3/802.3u
· Hardware Features:
RISC 166 Mhz Processor
1 Mb Flash Memory
16 Mb RAM
· Management:
Security:
Admin passwords
Authentication with UPAP and CHAP for PPPoE
Firewall:
Management through WAN & LAN port
HTTP web based management
Email alert of disconnection
· Applications:
Support MSN & Net meeting
Support with H.323 VoIP products
Multi-session PPPoE
SMTP binding
SNMP
NAT status & connection list
Virtual server
Multi-DMZ
MTU changeable for WAN
Dial-on-demand & Auto-disconnect
Dynamic DNS
MAC address clone
Transparent Bridge Mode
Product Spec Sheet
(PDF)
|
· Performance Features:
Throughput: Over 44 Mbps
Load Balace & Backup:
Outbound load balancing by bytes, packets, or sessions
Auto backup connection
Supported Protocols:
Security: NAT, UPAP, CHAP
Network: TCP/IP, DHCP, PPP, UPAP, PPPoE, Multi-session PPPoE
Routing: static route (WAN & LAN), ICMP, ARP Proxy, HTTP, RIP I/II
Connection: static IP, dynamic IP, PPPoE, PPTP
User Support: LAN: Up to 253 users
· Security Features:
VPN:
Gateway-to-Gateway Endpoint
IPSecTunnels: 30
Encryption: DES(56-bit), 3DES(168-bit), & AES(128-bit)
Authentication: MD5, SHA1, SHA2, Manual key & IKE
VPN throughput: 10 Mbps
Firewall:
Stateful Packet Inspection
NAT (Network Address Translation)
NAPT (Network Address Port Translation)
DoS (Denial of Service)
Access control by group
Ping to Death
ICMP filter for WAN
Packet filter
URL block
|
|
¤ The XiNCOM XC-DPG602 is a revolutionary DNS to IP Gateway that provides advanced networking services most commonly found in enterprise class infrastructures at a fraction of the cost. XiNCOM tailors these services with innovative features such as inbound/outbound load balancing and auto-failover. The XC-DPG602 functions as an authoritative DNS to IP Gateway that load balances inbound traffic requests to the respective IP address on a network infrastructure that hosts content throughout multiple web servers. High throughput of inbound and outbound requests is managed by dual WAN ports that utilize the combined bandwidth of two separate concurrent broadband connections including DSL, Cable, and/or T1.
Using two separate ISPs provides redundant connectivity to the Internet. In the event that one ISP goes down, the XC-DPG602 auto-fails over to the other ISP service. Redundancy to the Internet provides a truly uninterrupted connection for a business's customers while maintaining uptime and productivity for its employees.
The XC-DPG602 also features NAT, a Stateful Packet Inspection Firewall, DHCP server, Access Filters, and VPN pass-through to secure a businesss network services. The Quality of Service (QoS) feature schedules and directs a networks traffic to take advantage of available bandwidth. The XC-DPG602 UPnP support can dynamically open and close ports required by certain software automatically. Increased bandwidth and redundant connectivity to the Internet provides cost-effective bandwidth solutions to expensive leased telecommunication lines for your network infrastructure.
|
Key
Features
· Authoritative DNS to IP:
The XC-DPG602 is an authoritative DNS to IP gateway that
resolves a domain name to its respective IP addresses.
This new capability allows for inbound failover and load
balancing for servers located behind the gateway. Using
dual WAN ports simultaneously increases available bandwidth
for both uploads and download requests. You can set load
balance type by Packets, Bytes rx+tx and Sessions.
· Multiple Connection Methods:
All popular DSL and Cable Modems and connection methods
are supported, including Fixed IP, Dynamic IP, PPPoE,
even multiple-session PPPoE.
You can set load balance type by Packets, Bytes
RX+TX, and Sessions.
· 2 x 10/100 WAN Ports:
The XC-DPG602 incorporates dual 10/100 WAN ports, complete
with auto-crossover for easy connection to an existing
network. All popular DSL and Cable Modems and connection
methods are supported, including Fixed IP, Dynamic IP,
PPPoE, even multiple-session PPPoE.
· 4-Port 10/100 Switch:
The XC-DPG602 incorporates a 4-port 10/100 N-Way Ethernet
Switch, complete with auto crossover for easy connection
to an existing network.
· Automatic Fail-over:
If one broadband connection goes down all traffic is automatically
re-routed through the second broadband connection.
· Stateful Packet Inspection Firewall:
Protects your network using advanced SPI against malicious
and DDoS attacks.
· Advanced NAT features:
Access Filters, DMZ, DDNS, Remote Management, Dynamic
or Static Routing, Special Applications, Virtual Servers,
SNMPv1.
· Access Filter:
Gain fine control over the Internet access and applications
available to LAN users with a powerful URL Blocking Engine.
Five (5) user groups are available, and each group can
have different access rights.
· Rack Mount Support:
This Twin WAN Gateway comes equipped with rack mount supports
that fit a standard 19' rack mount.
Function of
the XC-DPG602
Step 1:
A domain name request enters the Gateway. The request
is checked by the Load Balancing algorithm that
determines which WAN port to use based on the Gateway’s
current load statistics.
Setp 2:
A reply is sent to the web browser. The Gateway
directs the browser session to the WAN port with
the least traffic.
Step 3:
The web browser is then connected to the appointed
IP address through that available WAN port.
Product Spec Sheet (PDF)
|
|
When inbound requests to the XC-DPG602 increases, traffic
is load balanced between WAN 1 and WAN 2 to maintain optimum
bandwidth for your network. |
|
¤
The XiNCOM XC-DPG603 is a revolutionary DNS to IP VPN Gateway that provides advanced networking
services most commonly found in enterprise class infrastructures at a fraction of the cost.
XiNCOM tailors these services with innovative features such as inbound/outbound load balancing,
auto-failover, and a built-in VPN endpoint.
The XC-DPG603's primary features are full VPN Aggregation with Automatic Failover and the
Authoritative DNS function with Inbound Load Balancing. The VPN capability will allow for
two aggregated VPN tunnles to effectively work as single tunnel combining VPN traffic over
two broadband connections. Full redundancy is assured when establishing a VPN tunnel on
each WAN port. The authoritative DNS feature load balances inbound traffic requests to
the respective IP address on a network infrastructure that hosts content on multiple servers.
High throughput of inbound and outbound requests are managed by dual WAN ports that utilize
the combined bandwidth of two separate concurrent broadband connections including DSL, Cable, and/or T1.
Using two separate ISPs provides redundant connectivity to the Internet. In the event that one ISP goes down,
the XC-DPG603 automatically fails over to the other ISP service. Redundancy to the Internet provides
a truly uninterrupted connection for a business's customers while maintaining uptime
and productivity for its employees.
The XC-DPG603 also features NAT, a Stateful Packet Inspection Firewall, DHCP server, Access Filters,
and VPN pass-through to secure a businesss network services. The Quality of Service (QoS)
feature schedules and directs a networks traffic to take advantage of available bandwidth.
The XC-DPG603 UPnP support can dynamically open and close ports required by certain
software automatically. Increased bandwidth and redundant connectivity to the Internet
provides cost-effective bandwidth solutions to expensive leased telecommunication
lines for your network infrastructure.
|
|
| |
Key
Features
· Physical Interface Features:
WAN:
2-port 10/100 Mbps RJ45
Auto-MDI/MDIX; 802.3/802.3u
LAN:
4-port 10/100 Mbps RJ45
Auto-MDI/MDIX; 802.3/802.3u
· Hardware Features:
RISC 166 Mhz Processor
1 Mb Flash Memory
16 Mb RAM
· Management:
Security:
Admin passwords
Authentication with UPAP and CHAP for PPPoE
Firewall:
Management through WAN & LAN port
HTTP web based management
Email alert of disconnection
· Applications:
Support MSN & Net meeting
Support with H.323 VoIP products
Multi-session PPPoE
SMTP binding
SNMP
NAT status & connection list
Virtual server
Multi-DMZ
MTU changeable for WAN
Dial-on-demand & Auto-disconnect
Dynamic DNS
MAC address clone
Transparent Bridge Mode
Product Spec Sheet
(PDF)
|
· Performance Features:
Throughput: Over 44 Mbps
Load Balace & Backup:
Outbound load balancing by bytes, packets, or sessions
Auto backup connection
Supported Protocols:
Security: NAT, UPAP, CHAP
Network: TCP/IP, DHCP, PPP, UPAP, PPPoE, Multi-session PPPoE
Routing: static route (WAN & LAN), ICMP, ARP Proxy, HTTP, RIP I/II
Connection: static IP, dynamic IP, PPPoE, PPTP
User Support: LAN: Up to 253 users
· Security Features:
VPN:
Gateway-to-Gateway Endpoint
IPSecTunnels: 30
Encryption: DES(56-bit), 3DES(168-bit), & AES(128-bit)
Authentication: MD5, SHA1, SHA2, Manual key & IKE
VPN throughput: 10 Mbps
Firewall:
Stateful Packet Inspection
NAT (Network Address Translation)
NAPT (Network Address Port Translation)
DoS (Denial of Service)
Access control by group
Ping to Death
ICMP filter for WAN
Packet filter
URL block
|
|
For a consultation on how a xincom firewall
can surpass the security needs of your company,
please contact
us today. |
|
|
